HOME ＞ PRODUCT ＞ WEDGE ＞ PRGR 0 TOUR WEDGE
Further pursuit of the competition type wedge.
Tour wedge with both high spin and ease-of-use.
The 0 TOUR WEDGE has a vertical fine milling on the face surface for stable spin rate even in the rain or rough.
In addition, the 0 TOUR WEDGE also has a sole shape that changes precisely with the loft to further pursue its function as a competition type wedge.
A pure and refined beauty worthy of being called a flagship model.
The deep finish with moderate brightness and beauty that feels lasting is one that will satisfy even athlete golfers who are particular about their appearance.
The face is less affected by moisture due to the vertical micro milling treatment on it, so the spin rate is stable even in the rain or rough.
48° 50° Trailing edge is sharpened to be smaller for ease of use.
52° 54° Toe heel is a bit more sharpened to emphasize both bounce effect and the ease of use.
56° 58° A large amount is sharpened from the toe heel to emphasize bounce effect.
ANGLE VIEW
DESIGN
SPEC
Shaft Specs |
48 |
50 |
52 |
54 |
56 |
58 |
|
|---|---|---|---|---|---|---|---|
Loft angle/bounce angle(°) |
48/6.0 |
50/8.0 |
52/8.0 |
54/10.0 |
56/10.0 |
58/12.0 |
|
Lie angle(°) |
63.5 |
||||||
Face progression(mm) |
4.5 |
5.0 |
5.0 |
5.5 |
5.5 |
6.0 |
|
Length(inch) |
DiamanaTM FOR PRGR FOR WEDGE |
35.5 |
|||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
35.25 |
||||||
N.S.PRO MODUS3 115（S） |
35 |
||||||
N.S.PRO MODUS3 105（S） |
35 |
||||||
Total weight(g) |
DiamanaTM FOR PRGR FOR WEDGE |
415 |
|||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
449 |
||||||
N.S.PRO MODUS3 115（S） |
460 |
||||||
N.S.PRO MODUS3 105（S） |
450 |
||||||
Balance |
DiamanaTM FOR PRGR FOR WEDGE |
D-0.5 |
|||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
D-1.5 |
||||||
N.S.PRO MODUS3 115（S） |
D-2.5 |
||||||
N.S.PRO MODUS3 105（S） |
D-1.5 |
||||||
Shaft weight(g) |
DiamanaTM FOR PRGR FOR WEDGE |
63 |
|||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
96 |
||||||
N.S.PRO MODUS3 115（S） |
106 |
||||||
N.S.PRO MODUS3 105（S） |
96 |
||||||
Shaft torque(°) |
DiamanaTM FOR PRGR FOR WEDGE |
2.4 |
|||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
1.6 |
||||||
N.S.PRO MODUS3 115（S） |
1.6 |
||||||
N.S.PRO MODUS3 105（S） |
1.7 |
||||||
Shaft KP |
DiamanaTM FOR PRGR FOR WEDGE |
M |
|||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
H |
||||||
N.S.PRO MODUS3 115（S） |
H |
||||||
N.S.PRO MODUS3 105（S） |
H |
||||||
Grip |
Weight: 50, Diameter: 59, Code: None, Back line: None |
||||||
Materials |
Soft iron(S20C) |
||||||
Manufacturing process |
Forged |
||||||
<Made in JAPAN>
*Club length: determined by PRGR measurement.
Comparison of PRGR 0 WEDGE
|
PRGR 0 TOUR WEDGE |
PRGR 0 WEDGE |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shaft Specs |
48 |
50 |
52 |
54 |
56 |
58 |
48 |
50 |
52 |
56 |
58 |
||
Loft angle/bounce angle(°) |
48/6.0 |
50/8.0 |
52/8.0 |
54/10.0 |
56/10.0 |
58/12.0 |
48/4.0 |
50/8.0 |
52/8.0 |
56/10.0 |
58/11.0 |
||
Lie angle(°) |
63.5 |
63.5 |
|||||||||||
Face progression(mm) |
4.5 |
5.0 |
5.0 |
5.5 |
5.5 |
6.0 |
5.0 |
5.0 |
5.5 |
6.5 |
6.5 |
||
Length(inch) |
DiamanaTM FOR PRGR FOR WEDGE |
35.5 |
35.5 |
||||||||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
35.25 |
35.25 |
|||||||||||
N.S.PRO MODUS3 105（S） |
35 |
35 |
|||||||||||
Total weight(g) |
DiamanaTM FOR PRGR FOR WEDGE |
415 |
412 |
||||||||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
449 |
448 |
|||||||||||
N.S.PRO MODUS3 105（S） |
450 |
448 |
|||||||||||
Balance |
DiamanaTM FOR PRGR FOR WEDGE |
D-0.5 |
D-0.5 |
||||||||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
D-1.5 |
D-1 |
|||||||||||
N.S.PRO MODUS3 105（S） |
D-1.5 |
D-1 |
|||||||||||
Shaft weight(g) |
DiamanaTM FOR PRGR FOR WEDGE |
63 |
60 |
||||||||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
96 |
96 |
|||||||||||
N.S.PRO MODUS3 105（S） |
96 |
96 |
|||||||||||
Shaft torque(°) |
DiamanaTM FOR PRGR FOR WEDGE |
2.4 |
2.8 |
||||||||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
1.6 |
1.6 |
|||||||||||
N.S.PRO MODUS3 105（S） |
1.7 |
1.7 |
|||||||||||
Shaft KP |
DiamanaTM FOR PRGR FOR WEDGE |
M |
M |
||||||||||
SPEC STEELⅢ Ver.2 FOR WEDGE |
H |
M |
|||||||||||
N.S.PRO MODUS3 105（S） |
H |
H |
|||||||||||
Grip |
Weight: 50, Diameter: 59, Code: None, Back line: None |
Weight: 50, Diameter: 60, Code: None, Back line: None |
|||||||||||
Materials |
Soft iron(S20C) |
Soft iron(S25C) |
|||||||||||
Manufacturing process |
Forged |
Forged |
|||||||||||
RELATED PRODUCTS
COPYRIGHT 2017 YOKOHAMA RUBBER.ALL right reserved